 | ***Hig-Mover actuator is currently out of stock*** | $1,690 |
 | Hig-Hub bus master (Bluetooth is optional-- see add-on daughterboard below) | $375 |
 | Bluetooth daughterboard for Hig-Hub bus master | $89 |
 | Hig-Hub "Core" module. Processor core essentials for user custom pcb applications. Has proc, oscillator, flash, Hig-bus line RS485 chip. Uses standard Hig-Hub firmware. All signals brought out to DIP pins. | $177 |
 | RJ45-USB FTDI serial cable | $63 |
 | RJ45-JST mover cable. Available in various lengths: | |
| RJ45-JST mover cable 3.5' | $8 |
| RJ45-JST mover cable 7.5' | $10 |
| RJ45-JST mover cable 12.5' | $12 |
| RJ45-JST mover cable 25' | $17 |
 | JST-JST mover cable. To connect nested movers. Available in two lengths: | |
| JST-JST daisy-chain cable 12" | $9 |
| JST-JST daisy-chain cable 3.5' | $11 |
 | JST-flying leads step-direction pigtail | $25 |
 | RJ45 power injector kit (for systems without Hig-Hub bus master) | $15 |
 | RJ45 coupler (included in above power injector kit) | $6 |
 | RJ45 splitter | $7 |
 | JST extractor tool | $7 |
 | Hig-Head camera head! Our 3D-printed plastic elbows can be configured as either a 2-axis pan-tilt head, or as a 3-axis pan-tilt-roll head. Head components are sold separately, and do not include Hig-Mover actuators, cables, camera, sliding camera base or iris rods. | |
| Pan-roll elbow | $288 |
| Roll-tilt elbow | $185 |
| Camera "L" bracket | $286 |
| Mount for 3/8" tripod top (not pictured) | $26 |