| Number of movers supported by apps | 8 (more possible with custom user applications) |
| Serial bus | RS485 @ 500k baud, n, 8, 1, isolated at Mover |
 | |
| Mover dimensions | 116mm X 53.15mm (4.57 X 2.093in) |
| Mover weight | 2.7 lb (1.23kg) |
| Mover bearing dynamic ratings | 400lb radial-thrust-moment |
| System supply voltage | 12-28vdc, 24v recommended |
| Mover supply current | 0.6 amps |
| Mover slip rings rating | 3 amps max |
| Mover top speed, no load | > 1rps |
| Mover peak torque | 12 in-lb (1.36nm) |
| Mover absolute accuracy | Approx. 0.25 degrees total |
| Mover GPI | 1.8-6.5vdc (can be extended with external resistor) |
| Mover slip ring ways | Ground, +Vsupply, RS485 bus (not step/direction or GPIO) |
 | |
| Hig-Hub dimensions | 5.5 X 5.25 X 1.63in (139.7 X 133.35 X 41.4mm) |
| Hig-Hub weight | 10oz (284g) |
| System supply voltage | 12-28vdc, 24v recommended |
| Power connector | 5.5mm X 2.1mm center pos. |
| Hub supply current | 0.05 amps |
| Hub analog inputs (8) | 5vdc max |
| Hub GPIs voltage (4 inputs) | 2.5 to 38vdc |
| Hub GPOs (4 outputs) | 38vdc, 100ma max |
| Hig-bus connectors | Two RS-485 in parallel, non-isolated, with diode-protected power output |
| Host PC connector | One RS-485, non-isolated, with power input in parallel with DC-in jack |
| Total current available for external accessory 5 volt outputs (joysticks + GPIOs) | 0.7 amps |